Join our community
Subscribe for exclusive style insights and exciting offers.
40wh: Working time 20~40Mins
80wh: Working timeWorking time 40~60 Mins
Battery Included: Yes
Body Material: Copper
Brand Name: EAFC
Handle Type: Palm Type
High-concerned chemical: None
Interface Material: Copper
Material: ABS and copper
Max flow rate: 270L/H
Nozzle Material: Engineering Plastic
Origin: Mainland China
Power Supply: Lithium battery
Product pressure: 60Bar
Water Pipes Length: 5-10m
Water Spray Type: Water Column
With Water Pipes: Yes
distance: 5 meters


Q & A
Q1: Why does the car washing machine not start after turning on the switch?he water pressure so small?
A1: Maybe the battery is out of power, please charge
Q2: Why is there no water after turning on the car washing machine
A2: Observe whether the water pipe is bent and the water cannot be released; press the car washer for more than 15 seconds and wait for the water to be sucked into the car washer
Q3:Water leaking from multi-function nozzle,Sudden increase in water pressure
A3:The multifunction nozzle is blocked,replace the nozzle
Q4:Water flows out after the machine is turned off
A4:There is water residue in the pump door after the machine is turned off
Q5:Foam bottle can't spray ? cleaning agent
A5:Drain the water completely before storing foam bottle clogged,clean with water
Q6: It can be started, but there is little or no water from the nozzle?
A6:
It may be that the water connector is not pressed tightly. Press the water connector directly twice for the second time until you hear a click.
It may be that air has entered the fuselage or the water pipe. You can directly fill the fuselage with water with a tap to drain the air, and then spray water by self-priming.
Q7: Battery indicator light off?
A7:Use a screwdriver to disassemble the battery case, and press and tighten the four iron pieces at the four corners of the circuit board.
Q8: Battery charged but won't start? Product does not start?
A8:It may be because the inserts inside the machine are loose or wet. Use a screwdriver to disassemble the battery case to see if the battery circuit board is wet. If it is only a little wet, it can be air-dried. If the entire circuit board is wet, scrape off any rusted areas and air dry. If it is not wet, just clamp the corners of the battery circuit board and a few iron pieces in the middle. If you don't know how to disassemble the machine, you can try knocking the gun head down on the ground or on the table a few times.
During use, be careful not to seepage of water in the battery, it will be recharged every time it is used up, and the battery will be thrown upside down.
If you have any problem, pls feel free to contact us give you a best solution,OK?
Thanks in advance.

Warm Tips:
1.After the car wash machine is used, it should run empty for a few seconds to drain the residual water in the machine, avoid oxidizing dirt and freezing for weather reasons, and store it in a dry and cool place.
2.Do not store in the trunk of the car in hot weather to avoid fire caused by high temperature.
3.Batteries need to be kept away from water.Remove the battery after use, so as not to affect battery life.










